Tutorials


CAPITAL 'T'




Capital T Block Tutorial

18" finished block
All seams are a scant 1/4” unless otherwise noted

Cutting:
Background Fabric
(1) 6 1/2"
(1) 6-7/8" x 13-3/4"
(8) 3-1/2" x 6-1/2" 

Feature Fabric

(1) 6-7/8" x 13-3/4" 
(16)3-1/2"

Assembly:

This block is put together in two simple units: A and B

Unit A

1. Place the two 6 7/8" x 13 3/4" rectangles with right sides together, lightest of the two fabrics on top. Lightly draw a straight line 6 7/8" from the short edge dividing the rectangle in half and forming two squares. Then draw two diagonal lines through the center of the two squares, sew a 1/4" away from the diagonal line on both sides.



2. Cut the rectangles apart on the drawn lines creating four half square triangle components. Press the seams to the lighter fabric. The finished units should measure 6 1/2".






Unit B

1. Lightly mark a line from one corner to the opposite corner on the wrong side of the sixteen 3 1/2" squares of the feature fabric.

2. Take a 3 1/2" feature square and place it, right sides together, on top of one of the 3 1/2" x 6 1/2" background fabric rectangle matching edges and making sure that the diagonal line runs as shown. Sew on the marked line. Repeat with the remaining seven 3 1/2" x 6 1/2" background rectangles and seven more of the 3 1/2" marked squares.

3. Cut 1/4" away from the sewn line as shown. Press the seam toward the focus fabric.





4. Take the remaining eight 3 1/2" feature fabric squares and place them on the units created in Step 3, right sides together, so that the marked diagonal line is as shown. Sew on the line.




5.  Cut 1/4" away from the sewn line as shown. Press the seam toward the feature fabric. One "geese" unit is completed. This unit should measure 3 1/2" x 6 1/2".







Putting The Block Together:

1. Join two of the geese units (B) created together as shown. Press seam away from the point of the geese. Repeat with the remaining six geese units to create a total of four new units. These units should measure 6 1/2" square.




2. Join the top and bottom Block rows by piecing two right triangle squares with one of the geese units as shown. Press seams toward the right triangle squares.




3. Create the middle row of the block by joining the last two geese units with the remaining 6 1/2" background square. Complete the Capital T Block by joining the three rows as shown. 




The complete quilt Block should measure 18 1/2" square which includes a 1/4" seam allowance on all sides.









No comments :